How to Install the Blade on the Limbsaw LSC?
Installing the blade on the LSC model limb saw requires the right equipment and techniques to ensure it runs smoothly.
Putting the blade on the LSC model limb saw can be challenging, but it can be done well with the right equipment and techniques. The LSC model comes with a compression disc that needs to be aligned properly to ensure that the saw runs smoothly.
To install the blade, first, you need to remove the guard by loosening the four bolts that hold it in place. Next, take out the coter pin and castle nut using an inch and a quarter socket or an adjustable wrench. The outer washer should be marked to indicate which side should face the blade and which side should face the motor.
Once the outer washer is in place, you need to align the flat spots on the compression disc and then put the castle nut on. Use a punch to hold the mandrel in place while you tighten the nut. Finally, reinsert the coter pin, put the guard back on, and secure the bolts.
Installing the blade on the LSC model limb saw is a multi-step process that requires the right tools and techniques.
By following the steps outlined above, you can ensure that the saw runs smoothly and that the blade is securely in place.