How do you adjust the oiler on the LS8 chain?

There are two ways to adjust the oiler on the LS8 model chainsaw. The first way is to use a long pair of needle nose pliers to reach in and adjust the needle valve. The second way is to remove the cover using an open-end wrench and slide it in to access the bolt.

To access the oiler, you will need to remove the four bolts that hold the cover in place. Once the cover is removed, you will have a better view of the oiler. The adjustment is made by cracking the needle valve open a little bit and then tightening it in place with a 9/16th syringe. The oiler tube is where the oil goes and is an important part of the oiling system.

It's worth noting that the oiler is typically sent out with the needle valve closed to prevent oil from spilling over everything. However, it's important to adjust the oiler to your specific needs and usage.

Adjusting the oiler on the LS8 model chainsaw is an important aspect of maintaining your chainsaw. Always ensure to follow proper installation and manufacturer's instructions so you can use your saw in a safe manner.