How do you adjust the tension on the LS8 Chain?
Properly maintaining your LS8 model chainsaw is crucial for ensuring optimal performance and prolonging the life of the saw. One important aspect of maintenance is adjusting the chain tension.
The first step in adjusting the tension on the LS8 chain is to use a 9/16th wrench. It's important to remember that right tight, left loose when adjusting the chain tensioner. The chain tensioner is located on the saw and can be adjusted by turning it with the wrench. It's recommended to check the tension of the chain every 30 to 45 minutes, depending on how often you are using the saw.
As you use the saw, the chain will naturally become loose. To fix this, you will need to tighten the chain tensioner. This can be done by tightening the bar cover bolts. Keep in mind that you should leave the chain a little loose when you first start using the saw, as the chain will naturally tighten as you tighten the nuts.
It's important to note that you should check the chain tension more often when cutting softer woods or dead hardwood. This is because these types of wood can cause the chain to become loose faster.
Adjusting the tension on the LS8 chain is an important aspect of maintaining your chainsaw. By following these instructions and checking the tension every 30 to 45 minutes, you can ensure that the saw is working at its best and prolong its lifespan. Remember, proper installation and following manufacturer's instructions are key to using this saw safely and efficiently.